3M Attest Biological Indicator Incubator 56c
The 3M Attest Biological Indicator Incubator is a system that provides convenient steam sterilization cycle monitoring. This self-contained biological indicator has the ability to reduce the possibility of sample contamination.
Instruction:
- Plug Your Unit into an Outlet
- Let the Unit Sit for Thirty Minutes to Reach Operational Temperature
- (You May Wish to Keep the Unit on to Avoid Warming-up)
- Once the Incubation Period Finishes, Don Safety Gear (Gloves and Glasses)
- Open the Unit Door
- Wait at Least Five-Minutes
- Retrieve the Attest Biological Indicator
- If the Indicator Does Not Reside Within Heat Absorbing Material, Let it Cool Another Ten Minutes Before Crushing
- If the Indicator is Inside of Heat Absorbing Material, Open the Material and Let Stand for Five Minutes Before Removing the Indicator
- (Let it Stand an Additional Ten Minutes and then Crush)
- Place the Incidator into the Unit’s Heating Block at an Approximately Forty-Five Degree Angle, with the Cap Extending Above the Block
- Press the Indicator Back to Crush the Phial to Activate
- Press the Indicator Down into the Heating Block
- Make Sure that the Cap Stays Above the Block
